Care And Maintenance; Warranty Disclaimer; Service And Support - Hama Ultra Fast Charge Bedienungsanleitung

Warning
• Only use suitable charging devices or USB connections for charging.
• As a rule, do not use charging devices or USB connections that are defective and do
not try to repair them yourself.
• Put your terminal device on the inductive charger (B) with the back to the charger.
• Charging starts as soon as an effective induction field has been generated. The current
charging status appears on your terminal device.
• If no connection can be established through induction, you may have to change the
position of your terminal device (B).
• Charging stops automatically once your device's battery is fully charged. The status LED
(2) changes its colour.
• Remove your terminal device from the inductive charger and disconnect the charger from
the power supply.

5. Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents.

6. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.

7. Service and Support

Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
4