Unpacking - Dik Geurts Instyle 500 EA Installationsanleitung

I N STA L L A TI O N MA N U A L

4. Unpacking

Follow the below points below when unpacking:
Ø
Check the appliance with accessories for (transport) damage.
Ø
Never install a damaged fire!
Ø
If necessary contact your supplier.
Keep plastic bags away from children.
!CAUTION
Ø
Annex 1, Table 1 mentions which parts you must have after unpacking.
Ø
For technical transport reasons the flame baffle plate is at the bottom of the fire with some appliances.
For fitting this flame baffle plate we refer to section 9 'Appliance-specific information' as applicable.
Ø
Transport may have caused parts to move around. Check the position of the baffle plate and inner lining plates.
Ø
Before installing check the operation of the air slide valve, door locking and any turning mechanism.
For the assembly/disassembly of these parts we refer to section 9 'Appliance-specific information' as applicable.
Ø
Remove any remaining blasting grit from the air slide valve.
Ø
If necessary contact your supplier.
Dispose of packaging in accordance with local regulations.
UK