Safety Instructions - Renkforce RRF1 6x32 Bedienungsanleitung

Operating instructions
Distance meter RRF1 6x32
Item no. 1486094
Intended use
The product is intended for measuring distances and speeds using a built-in laser. The product is also
equipped with a digital night vision mode. Power is supplied via batteries.
The product is suitable for use in dry areas only. Avoid contact with moisture at all costs.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them.
Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Distance meter
• Storage bag
• Hand strap
• Cleaning cloth
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or scan the printed
QR code. Follow the instructions on the website.
Description of symbols
The symbol with a flash in a triangle indicates health risks e.g. due to electric shock.
The symbol with an exclamation mark in a triangle indicates important instructions contained in
these operating instructions that must be followed.
The arrow symbol alerts the user to the presence of important tips and notes on using the
device.

Safety instructions

Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) General
• Never open the device. Setting or maintenance tasks must only be executed by a trained
specialist familiar with potential hazards. Improperly executed adjustments might result in
dangerous laser radiation.
• Caution: if operation settings or procedures other than those described in these instructions
are used, it could lead to exposure of dangerous radiation.
• Never use the product to stare into sunlight or other strong light sources. Also do not use in
the proximity of such. This poses a risk of loss of eyesight!
• When using the product, make sure not to receive any impacts or similar, as such could cause
severe damage to your eyes.
• Do not touch the lenses with your fingers.
• The rubber eye cup can cause skin irritation when used for longer periods of time. In the event
of skin irritation, consult your physician.
• Do not use the product for surveillance purposes. It is illegal to observe other persons without
their knowledge and consent.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
b) (Rechargeable) batteries
• Correct polarity must be observed while inserting the (rechargeable) batteries.
• (Rechargeable) batteries should be removed from the device if it is not used for a long period
of time to avoid damage through leaking. Leaking or damaged (rechargeable) batteries might
cause acid burns when in contact with skin, therefore use suitable protective gloves to handle
corrupted (rechargeable) batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave (rechargeable)
batteries lying around, as there is risk, that children or pets swallow them.
• All (rechargeable) batteries should be replaced at the same time. Mixing old and new
(rechargeable) batteries in the device can lead to (rechargeable) battery leakage and device
damage.
• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into fire. Never
recharge non-rechargeable batteries. There is a risk of explosion!
Operating elements
5
6
5
4
3
1 Eyepiece
2 Battery compartment
3 Lens
4 Laser/infrared outlet
5 Eyelet for hand strap
6 Control keys
Display
I
H
G
X1
F 1005hPa 29°C
E
A Inclination angle
B Battery status display
C Infrared status
D Compass
E Temperature
F Atmospheric pressure
G Zoom factor
H Reading
I Target point display
1
2
+05°
482 M
SE132° IR:OFF B
C
D
A