Electrical Connections - Indesit FI 20.A/1 S Bedienungsanleitung

Before connecting the appliance to the power supply, make sure that
GB
• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance, which is
indicated on the data plate.
• The voltage is in the range between the values indicated on the data plate.
• The socket is compatible with the plug of the appliance. If the socket is
incompatible with the plug, ask an authorised technician to replace it. Do
not use extension cords or multiple sockets.
! Once the appliance has been installed, the power supply cable and the
electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by authorised technicians
only (see Assistance).
! The manufacturer declines any liability should these safety measures
not be observed.
18
APPLIANCE SPECIFICATIONS
width 43,5 cm
Dimensions*
height 32,4 cm
depth 43,5 cm
Volume*
62 lt.
width 45,5 cm
Dimensions**
height 32,4 cm
depth 43,5 cm
Volume**
65 lt.
width 43,5 cm
Dimensions*
height 32,4 cm
(With self-cleaning
depth 40,6 cm
panels)
Volume* (With
self-cleaning panels) 58 lt.
width 45,5 cm
Dimensions **
height 32,4 cm
(With self-cleaning
depth 40,6 cm
panels)
Volume ** (With
60 lt.
self-cleaning panels)
voltage: 220-240V~ 50/60Hz or
Electrical
50Hz (see data plate) maximum
connections
power absorbed 2250 W
Directive 2002/40/EC on the label
of electric ovens.
Standard EN
Energy consumption Class
ENERGY
cerification Natural convection
LABEL
heating mode:
mode.
This appliance conforms to the
following European Economic
Community directives:
- 2006/95/EEC dated 12/12/06
(Low Voltage) and subsequent
amendments
- 2004/108/EEC dated 03/05/89
(Electromagnetic Compatibility)
and subsequent amendments
- 93/68/EEC dated 22/07/93 and
subsequent amendments.
- 2012/19/EC and subsequent
amendments.
* Only for models with drawn rails.
** Only for models with wire rails.
50304
Traditional