Intelligent Stagnation Flush; Stagnation Flush Time - WimTec Smart Montageanleitung

SMART
Function description

Intelligent stagnation flush:

DIP switch 4
Serves to rinse water supply lines in order to remove stagnant water that
accumulates during longer periods of disuse.
'ON' position =
Intellligent stagnation flush is enabled.
'OFF' position =
Intellligent stagnation flush is disabled (default setting).
Flushing interval
Can be set from 3 – 48 h at
the interval control, default
setting 24 h (see p. 18).
3 - 48 h

Stagnation flush time:

DIP switch 5
You can select one of two predefined stagnation flush times (10 or 20 s).
'ON' position = Stagnation flush time is set to 20 s.
'OFF' position = Stagnation flush time is set to 10 s (default setting).
Intelligent stagnation flush
If the fitting has not been
used for the set period, an
automatic flushing is perfor-
med for the duration (see
DIP 5) configured.
10 or 20 s
Washbasin fitting
ON
OFF
1 2 3 4 5 6
ON
OFF
1 2 3 4 5 6
WimTec SMART
EN
23