Pkm KS 117.4 A plus UB Bedienungsanleitung Seite 44

Change of the hinge position (freezer compartment door, fig.. 6)
Slightly open the freezer compartment door. Using a small screwdriver, press the
spring in the opening of the lower door bearing slightly upwards and take the door
bearing together with the door out. Position the cover cap (M) on the opposite side
0
Turn the door by 180 and fit the lower door bearing in the relevant opening. Lift
the door slightly upwards, fit it into the upper door bearing; at the same time insert
the lower door bearing in the square hole.
Small upward and downward adjustments of the door will make fitting easier.
44