Unpacking The Appliance; Overview Of The Appliance; Installation - BOMANN DU 652 IX Bedienungsanleitung

• Do not try to repair the appliance on your own. Always contact an authorized Do not try to repair the appliance on your own. Always contact an authorized Do not try to repair the appliance on your own. Always contact an authorized
technician. To avoid the exposure to danger, always have faulty cable be replaced To avoid the exposure to danger, always have faulty cable be replaced To avoid the exposure to danger, always have faulty cable be replaced
only by the manufacturer, by our customer service or by qualified person and with only by the manufacturer, by our customer service or by qualified person and with only by the manufacturer, by our customer service or by qualified person and with
a cable of the same type.
1. Remove the appliance from its packaging. Remove the appliance from its packaging.
2. Remove all packaging material, such as foils, filler, cable holder and cardboard packaging. packaging material, such as foils, filler, cable holder and cardboard packaging. packaging material, such as foils, filler, cable holder and cardboard packaging.
3. To prevent hazards, check the appliance for any transport damage. To prevent hazards, check the appliance for any transport damage.
4. In case of damage, do not put the In case of damage, do not put the appliance into operation. Contact your distributor.
NOTE: : : : NOTE
NOTE NOTE
Production residue or dust may have collected on the appliance. We recommend cleaning the appliance a sidue or dust may have collected on the appliance. We recommend cleaning the appliance a sidue or dust may have collected on the appliance. We recommend cleaning the appliance ac-
cording to chapter "Cleaning and Maintenance
NOTE: : : : The original appliance may differ from the appliance pictured here. NOTE original appliance may differ from the appliance pictured here.
NOTE NOTE
Supplied parts Supplied parts Supplied parts Supplied parts
1 x outer (lower) duct without ventilation slots 1 x outer (lower) duct without ventilation slots
1 x inner (upper) duct with ventilation slots 1 x inner (upper) duct with ventilation slots
Assembly material incl. drill template Assembly material incl. drill template
There must be a safety distance between the hotplate of the cooking pot on the hob and the There must be a safety distance between the hotplate of the
extractor hood:
The distance must be between 60 The d istance must be between 60 – – – –
The d The d istance must be between 60 istance must be between 60
installation instructions for the gas cooker specify a greater distance, this distance must be taken into consi installation instructions for the gas cooker spe
eration.

Unpacking the Appliance

Unpacking the Appliance Unpacking the Appliance Unpacking the Appliance
into operation. Contact your distributor.
and Maintenance".

Overview of the Appliance

Overview of the Appliance
Overview of the Appliance Overview of the Appliance

Installation

Installation
Installation Installation
– – – – 75 75 cm cm. For gas appliances, the distance must be at least 65 cm. . For gas appliances, the distance must be at least 65 cm. . For gas appliances, the distance must be at least 65 cm. If the . For gas appliances, the distance must be at least 65 cm.
75 75 cm cm . For gas appliances, the distance must be at least 65 cm. . For gas appliances, the distance must be at least 65 cm. . For gas appliances, the distance must be at least 65 cm. . For gas appliances, the distance must be at least 65 cm.
ify a greater distance, this distance must be taken into consid-
1 Telescopic duct, 2-part
2 Control panel
3 Aluminum grease filter
4 Lighting
1 x connecting piece with non
1 x extraction hose
ing pot on the hob and the bottom part of the
18
non-return valves