Operation As A Modem; Switching At Power On By Pressing A Button; Switching Via The User Interface - ZyXEL Communications VMG5304 Anleitung

OPERATION AS A MODEM

EN
Your VMG5304 supports operation as a pure ADSL/VDSL modem. If you want this
mode, please observe the following notes on activating the modem mode.
ATTENTION
You only need the modem mode when you want to operate a downstream router
or a firewall that does not have a suitable internal modem.
Please note: In modem mode, several functions such as telephony and Wi-Fi are
no longer available.
L L
NOTE
If you have customized any settings on your VMG5304, please save the custom
configuration via the user interface before resetting the device. You can then re-
load the configuration into the device later.

Switching at power on by pressing a button

Switching via the user interface

If you have already started the VMG5304 with the factory default settings, you
can switch to modem mode via the user interface:
To do this, enter the address
go to the menu System/Operating mode. Follow the instructions on the page to
activate the switch.
30 | ©2017
Hold down the button for
at least 10 seconds when
switching on the device.
zyxel.box or 192.168.100.1 in your Internet browser and