Bringing The Device Into Operation; Setting Display Position; Preparation Of Your Pc - Medion MD Business P54017 Bedienungsanleitung

Bringing the device into operation

Information
Please read the "Safety information" chapter on page 3 under all circumstances before
bringing the device into operation.

Setting Display position

Set the LCD-display up in accordance to your working environment. Your LCD-display is designed in such a way
that you can optimally adjust the viewing angle.
Please refer to the picture for the available adjustment and angle settings.
Important!
Before you rotate the display from a horizontal into a vertical position, please extend the
monitor to its maximum height, because the display might scratch the stand otherwise.

Preparation of your PC

You may have to make some preparations if you have been operating a tubed monitor on your computer up to
now. This will be necessary if your current monitor has been operated with settings that are not supported by
your new TFT screen.
The screen will represent up to 1680 x 1050 scanning elements. This resolution corresponds to the physical
resolution. TFT screens achieve complete image quality with the physical resolution. The display will not appear
on the whole area of the screen, under certain circumstances, if you change to a representation with deviating
settings.
Distortions can also appear in the representation, particularly in the case of lettering.
Set a resolution and image frequency on the PC supported by both monitors, using the old monitor, before you
connect the new monitor.
Shut down the PC and connect the new monitor.
You will be able to adjust the screen settings on the P54017 (MD 20263) as described after restarting.
(Pic.: Adjustments)
Bringing the device into operation
5