IKEA SMAKRIK Anweisungen Seite 5

ENGLISH
Safety
• After removing the packaging, make
sure the appliance is complete and
undamaged. If in doubt, do not use
the appliance and contact a qualified
professional.
• The electrical installation and the
electrical connection must be carried
out by a qualified technician according
to the manufacturer's instructions and
in compliance with the local safety
regulations.
• Packing elements (plastic bags,
polystyrene etc) must not be left within
reach of children as they may represent
a hazard.
• Never install the appliance in
environments where the temperature
may reach 0°C or lower (the appliance
may be damaged if the water freezes).
• Make sure the mains voltage
corresponds to the voltage indicated on
the appliance rating plate.
Connect the appliance to an efficiently
earthed socket with a minimum current
rating of 10A only. The manufacturer
may not be considered liable for
possible incidents caused by the failure
to adequately earth the mains.
• If the power socket does not match the
plug on the appliance, have the socket
replaced with a suitable type by a
qualified professional.
• Observance of safety directives requires
that a multi pole switch with a minimum
contact gap of 3 mm be used for the
installation.
• Do not use multiple plug adapters or
extension leads.
• The power cable on this appliance
must not be replaced by the user as this
operation requires the use of special
tools. If the cable is damaged or requires
replacing, contact an authorised service
centre only to avoid all risks.
To learn how to operate the appliance
correctly, when you use it for the first
time, follow the step-by-step instructions
given in the following chapters.
5