McCulloch CABRIO 251 / 25 cc Betriebsanweisung Seite 13

FAULT FINDING TABLE
Check STOP switch is in the position I.
Control fuel level min. 25%tank capacity.
Check air filter is clean.
Remove spark plug, dry it, clean it and
adjust it, and replace it, if necessary.
Control and adjust the carburetor screws
if necessary.
Change fuel filter. Contact your dealer.
Carefully follow the cutting accessory
assembly instructions.
Check metal cutting accessory is sharp.
Otherwise, contact your dealer.
Engine still gives trouble: contact your dealer.
Engine runs badly
Engine will
or looses power
not start
when cutting
•
• •
• •
• •
•
•
A
The machine
runs but does
not cut well
•
•
11