Noise/Vibration Information; Mounting And Operation; Maintenance And Cleaning - Bosch GSB 10,8-2-LI Professional Originalbetriebsanleitung

Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
19.12.2011

Noise/Vibration Information

The measured values of the machine are listed in the table on
page 138.
Noise and vibrational values (vector sum of three directions)
determined according to EN 60745.

Mounting and Operation

Action
Removing the Battery
Inserting the Battery
Mounting application tools
Reversing the Rotational Direction
Setting the Torque
Setting the Operating Mode
Gear Selection, Mechanical
Switching On and Off
Checking the battery charge condition
Selecting accessories

Maintenance and Cleaning

For safe and proper working, always keep the machine
and ventilation slots clean.
After-sales Service and Customer
Assistance
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Our customer service representatives can answer your ques-
tions concerning possible applications and adjustment of
products and accessories.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Bosch Power Tools
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Figure
1
2
3
4
5
6
7
8
9
–
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
English | 11
Page
139
139
139
140
140
141
141
142
142
143
2 609 140 865 | (16.1.12)