Setting The Sending Of Alert Emails - THOMSON 512322 Handbuch

Plug and Play 8 channel colour
network video recorder
7 8
1 Motion detection activation/deactivation
2 Relevant channel number
3 Activation/deactivation of an audible beep
during detection
4 Set the sensitivity from 1 (weak) to 8 (the
most sensitive)
5 After pressing this button the image of the
camera appears on the screen and a grid is
displayed. Click or draw the areas on the screen:
the red boxes are controlled by your device.
The transparent areas are ignored by the
motion detection function.
6 Corresponds to the recording time triggered
by motion detection, set from 30 secs to 5 mins
7 Select which camera(s) must start
recording when the selected camera
detects movement. For example, you can
trigger recording by 2 cameras when the
active camera detects movement.
8 When ticked, an indicator appears on
the screen to show that detection is activated
9 Tick to send an email if movement is
detected
10 Tick for the camera image to be displayed
on the full screen when movement is
detected
11 Click "Sauver" (Save) after making
modifications to save your settings
2.8 - SETTING THE SENDING OF ALERT
EMAILS
Your recorder can notify you by email if movement is
detected or for other events.
You must have 2 email addresses: the sender
address, which will be used by the device to send
1 2 3 4 5 6
9 10 11
d - CONFigurATiON
the alerts, and the receiver address to which the
alerts will be sent. The device uses the user name
and password of the sender address to connect
and send the email. Configuration depends on the
chosen email provider's settings.
Note: the 2 addresses can be the same (you will
simply be sending an email to yourself).
www.gmail.com example:
sender-address@gmail.com sends the alerts,
addressee@gmail.com receives the alerts. Both
addresses need to have been created beforehand.
To set email sending, go to "Paramètre"
(Settings)/"Réseau" (Network)/"Email":
1
5 6
1 Select "Activer" (Enable) to activate email
sending
2 Connection security, varies according to the
email provider. In our www.gmail.com
example, select "Activer" (Enable).
3 Port SMTP (SMTP port): varies according to
the email provider for the sender address. In
our gmail example: 465
4 Address of the server sending the email. In
our gmail example: smtp.gmail.com. Click
"shift" on the on-screen keyboard for "@".
2 3 4
7 8 9 10
17
en