THOMSON 512322 Handbuch Seite 49

Plug and Play 8 channel colour
network video recorder
d - CONFigurATiON
1 Compatible cameras detected on the
recorder network
2 The IP address the camera you wish to add
(filled in automatically if you click on one of
the cameras detected above)
3 Name that you have assigned the camera to
be added
4 Position of the name on the image
5 Camera connection port (filled in automatically
if you click on one of the cameras detected
above)
6 Communication protocol:
• select "Propriétaire" (Owner) for the
cameras in the Thomson digital video
recorder range (512320 to 512322, 512358
and 512359)
• select ONVIF for other compatible cameras
• (filled in automatically if you click on one of
the cameras detected above)
7 Camera user name (see note below)
8 Camera password (see note below)
9 Channel to which you want to assign the
added camera
10 Cameras already added to the recorder
11 Click "Recherche" (Search) to update the
list of cameras detected and cameras
already added
12 Click "Ajout" (Add) to add the camera
that you have selected
13 If you select a camera that has already been
added to the recorder, the "Effacer" (Delete)
button lets you remove it.
Important notes:
• The user name and password for the camera are
those normally used for your specific application
(example for Thomson IP cameras, references
512390 to 512393: Thomview).
Range and Default user
references name
Thomson IP admin
camera range
512390 / 512391
/ 512392
/512393
Thomson * NVR admin
camera range
512320 / 512321
/ 512322 /
512358 / 512359
Other ONVIF See instruction manual for the
cameras camera used
*THis information is known and entered automatically
by your digital video recorder's quick configuration
wizard.
• The ONVIF cameras can be used with your digital
video recorder but we cannot guarantee that they
are fully compatible (motion detection, motor
control for models fitted with motors, etc.)
• "mode automatique" (Automatic mode) on the
Switch menu pairs the cameras connected to the
"LAN1" to "LAN8" sockets. To pair cameras
that are not linked to these inputs, you must
select "mode manuel" (Manual mode) in the
Switch menu.
Default pass-
word
There is no
default pass-
word
admin
en
19