I - Reset - THOMSON 512391 Handbuch

720p WiFi Fixed ip Hd camera
The FTP settings must be copied using your
camera's Network menu - FTP Settings.
1 the address to enter in the camera settings
is: ftp://FTP server address of the Thombox/
FTP folder of the Thombox
2 You need to copy the FTP username as is
3 You need to copy the FTP password as is
4 The FTP port number is 21
5 The FTP port mode to use is PORT

i - rESET

If there is a problem or the login details have been lost, the camera can be reset to its default settings by
pressing the Reset button on the cable on the back of the camera for 10 seconds.
Settings
Username
Password
Time Zone
Ports
Plug and play access
Motion detection
Main video stream
Secondary video stream
Night vision
h - uSiNg ThE prOduCT WiTh A ThOMBOX
1
2
3
4
5
6
Default value
admin
(none)
GMT+1
http: 88
https: 443
ONVIF: 888
ftp: 21
Enabled
Disabled
720p @ 30 frames per second
VGA
auto
6
Test the data you have entered by clicking
on the Test button
• Once you have finished copying the settings
into your camera settings, activate motion
detection and enable 'prendre une photo
[take snapshot]' in the actions to take if motion
is detected (see end of paragraph D - 2.3 -
Example: programming an email alert to
be sent when motion is detected for more
details).
• Synchronise your box.
• This completes the configuration.
en
15