Maintenance And Service; Maintenance And Cleaning - Bosch WEU PEX 300AE Originalbetriebsanleitung

OBJ_BUCH-1334-001.book Page 21 Wednesday, November 17, 2010 10:18 AM
Polishing
For the polishing of weathered paint or buffing
out scratches (e.g., acrylic glass), the machine
can be equipped with appropriate polishing ac-
cessories such as lamb's wool bonnet, polishing
felt or sponge (accessories).
Select a low stroke rate (setting 1–2) for polish-
ing in order to avoid excessive heating of the
surface.
Apply the polish onto a somewhat smaller sur-
face than you intend to polish. Work the polish-
ing agent in with a suitable polishing tool apply-
ing it crosswise or with circular motion and
moderate pressure.
Do not allow the polishing agent to dry out on
the surface, otherwise the surface can become
damaged. Do not subject the surface to be pol-
ished to direct sunlight.
Clean the polishing accessories regularly to en-
sure good polishing results. Wash out polishing
accessories with a mild detergent and warm wa-
ter; do not use paint thinner.
Application Table
The data in the following table are recommend-
ed values.
The most favourable combination for working is
best determined by practical testing.
Roughening varnish
Touching up varnish
Removing varnish
Softwood
Hardwood
Veneer
Aluminium
Steel
Derusting steel
Stainless steel
Masonry, stone
Bosch Power Tools

Maintenance and Service

Maintenance and Cleaning

Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and ventilation slots clean.
If the replacement of the supply cord is neces-
sary, this has to be done by Bosch or an author-
ized Bosch service agent in order to avoid a safe-
ty hazard.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be found
under:
www.bosch-pt.com
Our customer service representatives can answer
your questions concerning possible applications
and adjustment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
180/240 2/3
Broadwater Park
120/240 4/5
North Orbital Road
40/60 5
Denham
Uxbridge
40/240 5/6
UB 9 5HJ
60/240 5/6
Tel. Service: +44 (0844) 736 0109
180/240 2–4
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
80/240 4/5
40/240 5
40/120 6
80/240 5
80/240 5/6
English | 21
2 609 004 767 | (17.11.10)