The Licenseplateholder & Lighting - PROUSER 91728 Jade Limited Edition Montageanleitung

THE LICENSEPLATEHOLDER
The fastening clips to
secure the number plate
are incorporated in the
back of the number plate
holder and can easily be
pressed out. Subsequently,
use two clips to secure the
number plate (at the bottom).
LIGHTING
This bike carrier is equipped with a lighting system. This system can be
connected to the tow bar power socket of your car. Seeing that there are
different kinds of sockets that require different
kinds of plugs, this carrier comes with the
usual 7-pin plug and the 13-pin plug
(Jaegers). As a result, the carrier can be used
with any tow bar!
Both plugs are in one housing. Please cover
the plug you don't use with the supplied cover.
Universal system 7 pin
Jaegers system 13 pin
(DIN 72.570)
1/L Indicator left
2/54G Rear fog light
3/31 Ground
4/R Indicator right
5/58R Rear light right
6/54 Stop lights
7/58L Rear light left
The reversing light and parking
system are not working via the
7-pin plug!
1 Indicator left
2 Rear fog light
3 Ground
4 Indicator right
5 Rear light right
6 Stop lights
7 Rear light left
8 Reversing light
9 Not used
10 Not used
11 Not used
12 Ground
13 Not used
33
yellow
blue
white
green
brown
red
black
yellow
blue
white
green
brown
red
black
gray