Bosch GWS Professional Bedienungsanleitung Seite 27

OBJ_BUCH-429-005.book Page 28 Wednesday, June 4, 2008 11:55 AM
28 | English
Note: The encoding keys on the protection
guard 6 ensure that only a protection guard that
fits the machine type can be mounted.
Protection Guard for Cutting
For cutting metal, always work with the pro-
tection guard for cutting 14.
For cutting stone, always work with the cut-
ting guide with dust extraction protection
guard 21.
The protection guard for cutting 14 is mounted
in the same manner as the protection guard for
sanding 6.
Vibration-dampening Auxiliary Handle
Operate your machine only with the auxilia-
ry handle 4.
Screw the auxiliary handle 4 on the right or left
of the machine head depending on the working
method.
The vibration-dampening auxiliary handle reduc-
es the vibrations, making operation more com-
fortable and secure.
Do not make any alterations to the auxiliary
handle.
Do not continue to use an auxiliary handle if it
is damaged.
Vibration Damper
The integrated vibration damper reduces occur-
ring vibrations.
Do not continue to use the power tool when
the damping element is damaged.
Hand Guard
For operations with the rubber sanding
plate 17 or with the cup brush/wheel
brush/flap disc, always mount the hand
guard 15.
The hand guard 15 is fastened with the auxiliary
handle 4.
1 609 929 L56 | (4.6.08)
Mounting the Grinding Tools
Before any work on the machine itself, pull
the mains plug.
Grinding and cutting discs become very hot
while working; do not touch until they have
cooled.
Clean the grinder spindle 5 and all parts to be
mounted.
For clamping and loosening the grinding tools,
lock the grinder spindle with the spindle lock
button 1.
Actuate the spindle lock button only when
the grinder spindle is at a standstill. Other-
wise, the machine may become damaged.
Grinding/Cutting Disc
Pay attention to the dimensions of the grinding
tools. The mounting hole diameter must fit the
mounting flange without play. Do not use reduc-
ers or adapters.
When using diamond cutting discs, pay atten-
tion that the direction-of-rotation arrow on the
diamond cutting disc and the direction of rota-
tion of the machine (see direction-of-rotation ar-
row on the machine head) agree.
See graphics page for the mounting sequence.
To fasten the grinding/cutting disc, screw on
the clamping nut 12 and tighten with the two-
pin spanner; see Section "Quick-clamping Nut ".
After mounting the grinding tool and before
switching on, check that the grinding tool is
correctly mounted and that it can turn free-
ly. Make sure that the grinding tool does
not graze against the protection guard or
other parts.
An O-ring (plastic part) is in-
serted in the mounting flange
10 around the centring collar.
If the O-ring is missing or is
damaged, it must in all cases
be replaced (article number
1 600 210 039) before the
mounting flange 10 is mount-
ed.
Bosch Power Tools