Setting The Clock - JVC kd-sc900r Bedienungsanleitung

Setting the clock

You can also set the clock system to either
24 hours or 12 hours.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 31 and 32.)
2
Set the hour.
1 Select "CLOCK H" (hour) if not shown on
the display.
2 Adjust the hour.
1
3
Set the minute.
1 Select "CLOCK M" (minute).
2 Adjust the minute.
1
4
Set the clock system.
1 Select "24H/12H."
2 Select "24H" or "12H."
1
8
2
2
2
5
Finish the setting.
To check the current clock time or change the
display mode
Press DISP (display) repeatedly.
Each time you press the
button, the display mode
changes as follows:
• During tuner operation:
Frequency
Note:
For the indication change during RDS operation,
see page 17.
• During disc operation:
Elapsed
playing time
Track title
Notes:
• While playing a conventional CD, "NO NAME"
appears for the disc title/performer and the track
title.
• For indication change while playing a CD Text or
an MP3 disc, see also pages 22 and 26.
• During power off:
The power turns on and the clock time is shown
for 5 seconds, then the power turns off.
Clock
Clock
Disc title /
performer