Cleaning And Maintenance - CONSTRUCTA ca 18350 Gebrauchsanweisung

Cleaning and maintenance:

Cleaning and maintenance: Cleaning and maintenance:
If the coating on the electric plates has worn off through use, smear them with a few drops of If the coating on the electric plates has worn off through use, smear them with a few drops of If the coating on the electric plates has worn off through use, smear them with a few drops of
oil or one of the maintenance products available on the market. oil or one of the maintenance products available on the market. oil or one of the maintenance products available on the market.
The high temperatures suffered by the cover on the triple-flame burner ring and the stainless The high temperatures suffered by the cover on the triple-flame burner ring and the stainless The high temperatures suffered by the cover on the triple-flame burner ring and the stainless
steel parts on your hob (plate rings, grease trays, area around burners, etc) may become steel parts on your hob (plate rings, grease trays, area around burners, etc) may become steel parts on your hob (plate rings, grease trays, area around burners, etc) may become
discoloured over time. This is NORMAL. Clean them after use with a product suitable for discoloured over time. This is NORMAL. Clean them after use with a product suitable for discoloured over time. This is NORMAL. Clean them after use with a product suitable for
stainless steel. stainless steel. stainless steel.
After cleaning the pans support, dry them thoroughly before cooking with them again. The After cleaning the pans support, dry them thoroughly before cooking with them again. The After cleaning the pans support, dry them thoroughly before cooking with them again. The
presence of droplets of water or dampness at the beginning of the cooking process may damage presence of droplets of water or dampness at the beginning of the cooking process may damage presence of droplets of water or dampness at the beginning of the cooking process may damage
the enamel surface. the enamel surface. the enamel surface.
If the pans support on your hob are supplied with rubber feet, be careful when cleaning as they If the pans support on your hob are supplied with rubber feet, be careful when cleaning as they If the pans support on your hob are supplied with rubber feet, be careful when cleaning as they
may come off, leaving thepan support unprotected and scratching the hob surface. may come off, leaving thepan support unprotected and scratching the hob surface. may come off, leaving thepan support unprotected and scratching the hob surface.
The cleaning product suitable for stainless steel must not be used in the area surrounding the The cleaning product suitable for stainless steel must not be used in the area surrounding the The cleaning product suitable for stainless steel must not be used in the area surrounding the
control knobs. The indications (serigraphy) may get deleted. control knobs. The indications (serigraphy) may get deleted. control knobs. The indications (serigraphy) may get deleted.
10
DON'Ts
Never use abrasive
products, sharp objects,
steel scouring pads,
knives, etc., to remove
stubborn food remains
from the hob surface,
grates, burners or electric
plates.
If your hob comes with a
glass or aluminium panel,
do not use knives,
scrapers or similar
utensils to clean the join
with the metal.
Do not use steam
appliances to clean the
hob with. They could
damage it.
Do not allow acid
products (vinegar, lemon
juice, etc.) to come into
contact with the hob.
Try to prevent salt from
coming into contact with
the surface of the electric
plate.
DOs
Once the appliance is
cold, clean it with a
sponge and soapy
water.
Remove all excess liquid
immediately. This will
help you avoid
unnecessary effort later.
The burners and pans
support must be cleaned
regularly to keep them
clean. This is done by
submerging them in
soapy water and
scrubbing them with a
non-metal brush to keep
the holes and slits free
from obstruction so they
can give a perfect flame.
Dry the burner covers
and grates whenever wet
or damp.
After cleaning and drying
the burners, make sure
that the covers are
properly in position on the
flame diffuser.