Emptying The Crumb Tray - Ritter Volcano 3 Gebrauchsanleitung

Toasting
• Place the bread in the toast-
ing slot (4).
• Push the ON button (3)
downwards until it locks into
place.
• Use the buttons for setting
the toasting degree (1.4/1.5)
to select the desired degree of
browning if required.
Toasting then begins.
After the set toasting time has
elapsed, toasting stops.
Reheating
• Place the bread you want to
reheat in the toasting slot (4).
• Push the ON button (3)
downwards until it locks into
place.
• Press the Reheat button (1.2).
The bread takes approx. 30 sec-
onds to reheat.
Defrosting
• Place the bread you want to
defrost in the toasting slot (4).
• Push the ON button (3)
downwards until it locks into
place.
• Press the Defrost button (1.3)
and then use the buttons for set-
ting the toasting degree (1.4/1.5)
to select the desired degree of
browning if required.
The defrosting and toasting
process then begins. The bread
is first defrosted and then
toasted to the selected toasting
degree.
After the set toasting time has
elapsed, toasting stops auto-
matically.
Warming­up
• Raise the bread and roll
rack (5).
• Place the bread you want to
warm up on the bread and roll
rack.
• Push the ON button (3)
downwards until it locks into
place.
• Use the buttons for setting
the toasting degree (1.4/1.5)
to select the desired degree of
browning if required.
Interrupting operation
• Press the Stop button (1.1)
to interrupt operation of the
appliance at any stage.
After you press the Stop button,
the toasting degree is reset to
the default settings.
WHAT TO DO IF BREAD
BECOMES JAMMED
If the item you are toasting
gets jammed in the toasting
slot, the toaster switches off
after the set toasting degree is
complete.
• You then need to pull the
mains plug (7) out of the
socket.
• Carefully try to loosen the
bread and remove it from the
toaster in one piece (e.g. using
a small wooden implement).
EMPTYING THE CRUMB
TRAY
You should ideally empty
the crumb tray (8) after each
use to prevent breadcrumbs
from carbonizing or becoming
baked onto the toaster (see
CLEANING section).
CLEANING
Clean the toaster after each
use to prevent the accumula-
tion of food residue.
WARNING: Risk of
electric shock:
Always unplug the appli-
ance from the mains before
cleaning.
CAUTION: Risk of burns:
Always allow the toaster to
cool down before cleaning.
• Remove the crumb tray (8)
from the appliance and remove
any crumbs.
• Clean and dry the crumb tray
manually (NOT in the dish-
washer).
• Wipe down the external
housing parts with a damp
cloth.
CAUTION: Risk of damage
to the toaster:
– Do not use any abrasive
cleansers, sponges with
rough surfaces or hard
brushes to clean the appli-
ance.
– Never clean the interior of
the toasting slot.
DISPOSAL
Once it has reached
the end of its service
life, this product must
not be disposed of as
normal domestic waste. It must
be taken to a dedicated
collection point for the recycling
of electrical and electronic
devices. This is indicated by
the symbol on the product, the
operating instructions or the
packaging.
English
13