The Booster Function - KKT KOLBE IND7705FZ Bedienungsanleitung

Using your Induction hob
4. Beware of hot surfaces
An „H" appears on the display, which means that the button
is too hot to touch. It will disappear when the surface has
cooled down to a safe temperature. It can also be used as an
energy-saving function, if you want to heat further pans - use
the hot plate, which is still hot.

6.3 The booster function

You can use the booster function to maximize the power of
a zone for a certain time.
Activate the boost function
1. Touch the button for the specifi ed cooking zone.
2. Touch the boost control button.
The zone indicator will display „b" - the power setting will be maximized.
Cancel the boost function
At fi rst, touch the target zone button. Then touch the boost control
again or pull the slider to your target power.
Important note about the booster function - 5 minutes running time!
When a cooking zone is switched directly from the „0" position into the
booster, the cooking zone switches off completely aft er approx. 5 minutes.
!
!
37