About The Dvb-T Receiver; Connect Antenna; Initial Installation - AEG CTV 4951 Bedienungsanleitung

English
44

Connect Antenna

Initial Installation

Perform General Settings

About the DVB-T Receiver

The signals received by the antenna cannot be processed by a TV. The
signals are converted with an integrated DVB receiver, so that audio
and video signals are available for output to the TV.
DVB-T abbreviated for:
Digital Video Broadcasting Terrestrial: A universal digital broadcasting
technology for picture, graphic sound and text, typically for data in
any possible form and any possible applicable quality.
NOTE:
■
You can only select the DVB-T settings menu during DVB-T
operation.
■
A variety of external interferences can influence the DVB-T
reception quality.
Connect the antenna cable to "ANT. " (Fig. 1/1).
For the initial installation of the system the installation wizard is
displayed.
B
navigation buttons (▲/▼) to select an option.
Use the
B
Use the navigation buttons (►/◄/▲/▼) to change the setting.
B
Press ENTER (Fig. 2/21) to confirm.
■
OSD Language:
Select the language to be displayed on screen.
■
Area: Select your country as the location of the unit.
Press the ENTER button again and select „Yes " in the security prompt
to start scanning.
The unit switches to TV operation after the installation wizard has
finished the scan (100%).
Navigate Menus and Submenus
B
Use the navigation buttons
toggle between menu items.
After selecting an option in a submenu it is highlighted in yellow.
B
Press "ENTER" to confirm the selected menu item.
The settings for this menu item are displayed.
B
Use the navigation buttons
to the next.
The selected setting is highlighted.
B
Press ENTER to access the setup menu.
B
You can:
▼, ▲ on the remote control to
▼ and ▲ to move from one setting