grabner Happy Cat Ultralight Handbuch Seite 22

uSeful iNfOrMatiON: if inserting
the frame lugs into the sleeve-sockets
proves difficult, apply some silicone spray
onto the lugs.
► Inflate the tubes to a state, where the
float tubes attain their final shape.
► Inflation, refer to "General operating in-
structions – Part 2"
22
For use the foredeck cover (accessory)
► Insert the crossbars longer lugs forward
into front positioned sleeve sockets of
the floater tubes close to the bows.
► Lift the other sockets and slide the shor-
ter lugs into them.
► Push the crossbar both sides as far back
until it touches.
► Inflate the float tubes to full operation
pressure (0.3 bar)