Updating The Satellite And Transponder Data - axing SZU 21-00 Betriebsanleitung

Operation Instructions SZU 21-00
Chapter 4: Update
Fig. 18: Update cancelled
Note
Fig. 19: Update menu of the
SZU 21-00
Fig. 20: Display of the Satfinder
Serial.exe on the PC
Fig. 21: Display during the file
transfer
09.08.16
Check the connection and verify whether the right COM port is used.
8. The update is made with a version of the software that is already installed on the SAT-Navi.
In this case, the display will show the message "The STB is up-to-date!".
4.4

Updating the satellite and transponder data

To transfer the changed satellite and transponder data to the SAT-Navi SZU 21-00, the SZU 21-00 must
be updated to the current firmware version serial _1.0.95 or a newer version.
The new satellite and transponder data are installed on the SZU 21-00 by means of the Satfinder
Resource Upgrade software.
Connect the PC and the SZU 21-00 to the programming set SZU 22-00 (see 4.1 on page 9).
Switch on the SAT-Navi and select Update in the main menu.
Under the menu item "Update", menu items Update ALL and Update Resources will appear.
For a satellite and transponder data update, select Update Resources and press OK to confirm.
Double-click Satfinder Serial.exe to start the program on the PC.
Select the correct COM port in the Port field and open the smg folder by pressing the Open button.
Select the romimageSatfinder.bin file and click Send.
© AXING AG • Reserving change in design and type - We cannot be held liable for printing errors
11