Technical Data; Noise/Vibration Information; Declaration Of Conformity; Mounting And Operation - Bosch GBH Professional 14,4 V-LI Compact Originalbetriebsanleitung

OBJ_BUCH-1331-004.book Page 12 Wednesday, November 27, 2013 10:01 AM
12 | English

Technical Data

The technical data of the machine are listed in the table on
page 176.
GBH 14,4 V-LI
Battery
Permitted ambient
temperature
– when charging
°C
– during operation*
°C
– during storage
°C
Recommended GBA 14,4V x,x
batteries
* Limited performance at temperatures <0

Noise/Vibration Information

The measured values of the machine are listed in the table on
page 176.
Noise and vibrational values (vector sum of three directions)
determined according to EN 60745.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or insertion
tools or is poorly maintained, the vibration emission may dif-
fer. This may significantly increase the exposure level over
the total working period.

Mounting and Operation

The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action
Removing the battery
Inserting the battery
Checking the battery charge
condition
1 609 92A 0C5 | (27.11.13)
An estimation of the level of exposure to vibration should al-
so take into account the times when the tool is switched off
or when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total work-
ing period.
GBH 18 V-LI
Identify additional safety measures to protect the operator
Compact Compact
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.
0...+45 0...+45
–20...+50 –20...+50

Declaration of Conformity

–20...+60 –20...+60
GBA 18V
We declare under our sole responsibility that the product de-
Ah M-. x,xAh M-.
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardisation documents: EN 60745
°C
according to the provisions of the directives 2009/125/EC
(Regulation 1194/2012), 2011/65/EU, 2004/108/EC,
2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 27.11.2013
100 %
0 %
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Figure Please observe
1
2
3
Page
177
177
177
Bosch Power Tools