Denon AVR-1705b Bedienungsanleitung Seite 24

ENGLISH
4
Select the surround parameter mode.
Display
MODE cinema
(Main unit) (Remote control unit)
To perform this operation from the remote
control unit, check that the mode selector
switch is set to "AUDIO".
5
Select the optimum mode for the source.
(Main unit) (Remote control unit)
MODE cinema MODE music
or or
6
Set the surround parameters according to the
mode.
(Main unit) (Remote control unit)
• The mode switches as shown below each
time the button is pressed.
MODE CINEMA MODE MUSIC
CINEMA EQ CENTER IMAGE
TONE DEFEAT TONE DEFEAT
SURROUND BACK SURROUND BACK
DEFAULT DEFAULT
If you do want the bass and trable to be
adjusted, turn off the tone defeat mode.
24
7
Set the various surround parameters.
• CINEMA EQ setting
CINEMA EQ OFF
ON OFF
or or
• CENTER IMAGE setting
C.IMAGE 0.3
0.0 0.3 1.0
or or
• TONE DEFEAT setting
TONE DEF. ON
ON OFF
or or
• SURROUND BACK SPEAKER setting
SB : ON
ON OFF
or or
• D.COMP. setting
D.COMP. OFF
OFF LOW MID HIGH
or or
NOTE:
• This parameter is displayed during DOLBY
DIGITAL playback.
• LFE setting
LFE 0dB
-10dB -5dB 0dB
or or
NOTE:
• This parameter is displayed during DOLBY
DIGITAL playback.
• DEFAULT setting
DEFAULT Y/N
YES Y/N NO
or or
Select "Yes" to reset to the factory defaults.
8
Press the ENTER button to finish surround parameter mode.
(Remote control unit)
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the
last button was pressed and the setting will be completed.
Surround parameters q
Pro Logic II x and Pro Logic II Mode:
• The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround.
• The Music mode is recommended as the standard mode for auto sound music systems (no video), and is
optional for A/V systems.
• The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source
contents is not of optimum quality.
• The Game mode for playing games. The game mode can only be used with 2-channel audio sources.
Select one of the modes ("Cinema", "Music", "Pro Logic"or "Game").
Panorama Control:
This mode extends the front stereo image to include the surround speakers for an exciting "wraparound"
effect with side wall imaging.
Select "OFF" or "ON".
Dimension Control:
This control gradually adjust the soundfield either towards the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only from the center speaker; only from the left/right
speakers as a phantom image; or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
DTS NEO:6 Mode:
• Cinema
This mode is optimum for playing movies.
performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources.
This mode is effective for playing sources recorded in conventional surround formats as well, because the
in-phase component is assigned mainly to the center channel (C) and the reversed phase component to the
surround (SL, SR and SB channels).
• Music
This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder
and are played directly so there is no loss of sound quality, and the effect of the surround signals output
from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound
field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the center channel in the DTS NEO:6 MUSIC
mode has been added.
Decoding is performed with emphasis on separation