Technical Data - Napoleon ROGUE 425 Bedienungsanleitung

6
WARNING!
•
EN
•
•
•
•
•

Technical Data

The following table lists input values for the appliance.
Side (Infra Red)
Side (Flame)
Certified Gases / Pressures - Check rating plate to ensure that it corresponds with the following list.
Gas Category
Orifice Sizes(see above)
Gases / Pressures
Countries
Do not tamper with or modify regulator. Use only regulators which supply the pressure listed in the table
above. For replacement, use only the regulator specified by the manufacturer.
www.napoleongrills.com
Do not route hose underneath drip pan.
Do not route hose between space in bottom shelf and back panel.
Do not route hose over top of back panel.
Ensure all connections are tightened using two wrenches. Do not use Teflon tape or pipe dope on any
hose connection.
Ensure the hose does not contact any high temperature surfaces, or it may melt and leak causing a
fire.
Do not use enclosure to store excess hose, as there is a greater chance of the hose contacting a hot
surface, it may melt and leak causing a fire.
Burner
I
Main #61
0.86mm
0.86mm
I
3B/P(30)
I
Butane and Propane at
30mbar
BE, BG, CY, DK, EE, FI, FR, GB,
HR, HU, IS, IT, LT, LU, MT, NL,
NO, RO, SE, SI, SK, TR
Orifice Size
II III
#64 #65
#66 #69
#66 #69
I
3+(28-30/37)
I
Butane 28-30mbar Pro-
pane 37mbar
BE, CH, CY, CZ, ES, FR, GB,
GR, IE, IT, LT, LU, LV, PT,
SK, SI
(Gross) Heat Gas Usage
Input (Total (Total)
I / II / III I / II / III
12.45 kW 906 g/hr
3.0 kW 218 g/hr
3.0 kW 218 g/hr
I I
3B/P(37) 3B/P(50)
II III
Butane and Butane and Pro-
Propane at pane at 50mbar
37mbar
PL AT, CH, DE, SK