Selecting A Sound Field Program - Yamaha HTR-5630RDS Bedienungsanleitung

PLAYBACK

Selecting a sound field program

You can enhance your listening experience by selecting a
DSP program. For details about each program, see pages
27 – 30.
STANDBY
/ON
SILENT SPEAKERS
STEREO PROGRAM A/B/C/D/E
ON A
OFF B EFFECT
PHONES
PROGRAM l / h
/DTS 6.1/5.1 NIGHT
TEST
PROG
LEVEL
Press PROGRAM l / h (PROG –/+ on the
remote control) repeatedly to select the
desired program (including sub-programs if
available).
The name of the selected program (or sub-program)
appears on the front panel display.
PROGRAM
Front panel
VCR V-AUX
Adventure
Program No. 7, 8 and 9 have two sub-programs
respectively. Refer to page 29 for details.
24
VOLUME
PRESET/TUNING FM/AM
EDIT
TUNING MODE MEMORY
AUTO/MAN`L MONO MAN`L/AUTO FM
INPUT MODE
PRESET/TUNING CONTROL BASS/TREBLE
INPUT
NEXT SET MENU
SLEEP
STEREO
VOLUME
PROG
MUTE
SET MENU
VOLUME
PROG –/+
PROG
or
MUTE
Remote control
D-TV/CBL DVD MD/CD-R TUNER CD
Notes
• There are 9 programs with sub-programs available with this
unit. However, the selection depends on the input signal
format and not all sub-programs can be used with all input
signal formats.
• You cannot use the digital sound field processor with a source
connected to the 6CH INPUT jacks of this unit or when the
unit is reproducing a digital source with a sampling frequency
greater than 48 kHz.
• The acoustics of your listening room affect the DSP program.
Minimize the sound reflections in your room to maximize the
6CH INPUT
effect created by the program.
• When you select an input source, this unit automatically
selects the last DSP program used with that source.
• When you set this unit in standby mode, it stores the current
source and DSP program in memory and automatically selects
them when you turn on the power again.
• If the unit receives a Dolby Digital or DTS signal when the
input mode is set to AUTO, the DSP program (No. 7–9)
automatically switches to the appropriate decoding program.
• When the unit is reproducing a monaural source with PRO
LOGIC or PRO LOGIC/Enhanced, or PRO LOGIC II Movie,
no sound is output from the main and rear speakers. Sound can
only be heard from the center speaker. (If "1A CENTER" on
the set menu is set to NON, the center channel sound is output
from the main speakers.)
y
• Select a program based on your listening preference. Program
names are just for reference.
PROG
VOLUME
L C R
LFE RL RR