Built-In Player; Playing A Disc; Repeating Play; Playing Tracks In Random Order - Pioneer DEH-112E Bedienungsanleitung

Operating this unit

Built-in Player

Playing a disc

1 Insert a CD into the CD loading slot.
Playback will automatically start.
# Be sure to turn up the label side of a disc.
# After a CD has been inserted, press SOURCE
to select the built-in CD player.
# You can eject a CD by pressing EJECT.
2 To perform fast forward or reverse,
press and hold c or d.
3 To skip back or forward to another
track, press c or d.
Notes
! Read the precautions for discs and player on
page 12.
! If an error message such as ERROR-11 is dis-
played, refer to Error messages on page 12.

Repeating play

Repeat play lets you hear the same track over
again.
1 Press FUNCTION to select RPT.
2 Press c or d to select the repeat range.
DSC – Repeat all tracks
TRK – Repeat the current track
# If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
# To return to the normal display, press BAND.

Playing tracks in random order

Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select RDM.
2 Press a or b to turn random play on or
off.
When random play is on, RDM appears in the
display.
# To return to the normal display, press BAND.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press FUNCTION to select SCAN.
2 Press a to turn scan play on.
SCAN appears in the display. The first 10 sec-
onds of each track is played.
3 When you find the desired track press
b to turn scan play off.
# If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.
# After scanning of a CD is finished, normal
playback of the tracks will begin again.

Pausing disc playback

Pause lets you temporarily stop playback of
the disc.
1 Press FUNCTION to select PAUSE.
2 Press a or b to turn pause on or off.
# To return to the normal display, press
BAND.

Audio Adjustments

Using balance adjustment

Fader/balance setting creates an ideal listen-
ing environment in all occupied seats.
1 Press AUDIO to select FAD.
2 Press a or b to adjust front/rear speak-
er balance.
FAD F15 to FAD R15 is displayed.
# FAD 0 is the proper setting when only two
speakers are used.
3 Press c or d to adjust left/right speaker
balance.
BAL L15 to BAL R15 is displayed.
# To return to the normal display, press BAND.
Section
02
9
En