Adjusting Pitch And Phase - Wacom DTF-521 Benutzerhandbuch

ADJUSTING PITCH AND PHASE

Some computers and video cards may not allow the auto-sync function to fully work when the DTF-521
is first connected. If some portion of text appears blurred, adjust pitch and phase by following the
procedure below. For crisp images, set the resolution of your video card to 1024 x 768.
• In the Pen Tablet control panel, select
the C tab.
ALIBRATE
• If you are working with multiple
displays, be sure the display
corresponding to the DTF-521 is
selected in the M
ONITOR
• Click on the C
ALIBRATE
activate the calibration screen.
• Using the OSD controls, open the
OSD menu and select the P
Then adjust the pitch level so that the
pattern of fine vertical stripes displays
evenly. (For details on changing the
OSD settings, see On Screen Display
(OSD) settings on page 27.)
• In the OSD menu, select the P
icon. Adjust the phase level so that the
adjustment pattern shows clearly.
• After completing these adjustments,
press the E and M
NTER
exit the OSD menu.
Click on the C
ANCEL
E to exit the calibration screen.
SC
Customizing
Page 30
menu.
... button to
icon.
ITCH
HASE
buttons to
ENU
button or press
Adjustment pattern for pitch and phase.