Wacom DTF-521 Benutzerhandbuch Seite 30

K .... Enables you to simulate keystrokes. Selecting this option displays the D
EYSTROKE
K dialog box where you can enter a keystroke or keystroke sequence to play back.
EYSTROKE
You can manually enter a keystroke or keystroke
combination in the K
EYS
combinations can include letters, numbers, function
keys (such as F3) and modifier keys (such as S
A , or C for Windows, or
LT TRL
, and
COMMAND CONTROL
You can also select special keystrokes or keystroke
combinations from the A
menu.
After defining a keystroke sequence, click OK.
Important: Because the E
and (Macintosh) keys can be
RETURN
selected as a defined keystroke, they
cannot be used to select OK. You must use
your pen to click on the OK button.
If prompted, enter a name for the keystroke
definition. the name will be displayed with the
respective control or in the Pop-up Menu list, as
applicable.
O /R .... Opens a dialog box where you can select a specific application, file, or script to launch.
PEN UN
Click B ... to locate an application,
ROWSE
file, or script to launch. The selection you
make appears in the A
box.
Click OK to accept the selection. The dialog
box will close and the O
will be assigned as your pen button option.
If your selection is for the Pop-up Menu, it
will be displayed in the Pop-up Menu list.
P H . Locks the pressure at the current pressure level until the side switch is released. For
RESSURE OLD
example, you can paint with pressure sensitivity until you reach the brush size that you like. You can
then press the switch and continue painting with the same size brush until the switch is released.
E . (Macintosh.) Tiles all open windows.
XPOSÉ
D . Disables the button function.
ISABLED
D . Returns a button to its default setting.
EFAULT
Customizing
Page 26
entry box. Keystroke
, ,
SHIFT OPTION
for Macintosh).
S drop-down
DD PECIAL
(Windows)
NTER
PPLICATION TO RUN
/R ... option
PEN UN
,
HIFT
Clears the
keystroke
entry box.
EFINE
Deletes only the last entry
in the keystroke entry box.