Installing/Removing The Processor; Technical Data - Fujitsu D3400 Handbuch

Installing/removing the processor

Installing/removing the processor
Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in the operating manual of your system.

Technical data

• Socket LGA 1151, max. 65 W
• A current list of the processors supported by this mainboard is available on the
Internet at: "http://www.fujitsu.com/fts/products".
Never touch the underside of the processor. Even minor soiling such as grease
from the skin can impair the processor's operation or destroy the processor.
Place the processor in the socket with extreme care, as the spring contacts
of the socket are very delicate and must not be bent.
If one or more spring contacts are bent do not insert the processor in any case as
it may be damaged by doing so. Please contact the responsible dealer.
Fujitsu
English - 5
19