Error Messages - Sharp MD-MT88HSHAP Bedienungsanleitung

Error Messages

ERROR MES-
SAGES
BATT EMPTY
BLANK MD
Can't COPY
Can't EDIT
Can't READ (*) z The disc data cannot be read because
Can't REC
E-43
ENGLISH
MEANING
z The battery has run down.
z Nothing is recorded.
(Replace the disc with a recorded disc.)
z You tried to record from a copy prohib-
ited MiniDisc.
z You tried to record signals other than
music (such as data).
(Record using the analogue cable.)
z A track cannot be edited.
(Change the stop position of the track and
then edit it.)
the disc or unit is damaged.
(Reload the Minidisc or replace it with an-
other one.)
z Recording cannot be performed cor-
rectly due to vibration or shock.
ERROR MES-
SAGES
z Stamp function does not work.
Can'tSTAMP
(Check the number of tracks.)
z Cannot save the TOC information cor-
Can'tWRITE
rectly to a MiniDisc.
z The disc is scratched.
DEFECT
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)
z The disc is out of recording space.
DISC FULL
z The microprocessor has reported a
Er-MD (**)
system fault and the unit is out of or-
der.
(To have it repaired, go to the distributor
where you purchased the unit.)
z The unit is in the hold mode.
HOLD
z You removed a MiniDisc whilst record-
LOCKED
ing or editing.
(Turn off the power and remove the Mini-
Disc.)
z A disc has not been loaded.
NO DISC
Number or symbol appears in (*) position.
MEANING