Chimney Fire - wiking Arctic Bedienungsanleitung

In the table below you'll find your wood-burning stove's nominal output, which is to be used to
properly dimension your chimney.
Nominal output:
Smoke temperature:
Exhaust gas mass flow:
After a Longer Period of Disuse
If you have not used your wood-burning stove in a while (e.g. for an entire summer season), it
is important to check for blockage in the chimney duct. Contact your local chimney sweep.
Connecting Several Heating Sources to the Same Chimney
It is possible to connect several units to some chimneys. All applicable regulations must first
be consulted, in your building code and with your local chimney sweep.

Chimney Fire

In the event of a chimney fire:
Close all dampers in the stove and chimney and immediately call the fire department.
•
Before using the wood-burning stove again, your local chimney sweep must first inspect the
chimney.
7 kW according to EN norm
o
285 C
8, g/sek.
English
3