Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch PRIO Lithium-Ion Originalbetriebsanleitung

OBJ_BUCH-113-002.book Page 18 Wednesday, July 8, 2009 8:28 AM
18 | English
5 Battery charger
6 Charge connector
7 Extraction outlet
8 Dust protection cap
9 Extraction adapter*
10 Vacuum hose*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.

Technical Data

Cordless Multi Sander
Article number
Rated voltage
No-load speed
No-load orbital stroke
rate
Sanding sheet surface
Orbit diameter
Weight according to
EPTA-Procedure
01/2003
Battery
Capacity
Number of battery cells
Battery Charger
Charging time
Article number
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
1 609 929 S57 | (8.7.09)

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is 76 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
tainty K =1.5 m/s
The vibration emission level given in this infor-
PRIO Lithium-
mation sheet has been measured in accordance
Ion
with a standardised test given in EN 60745 and
3 603 J19 7..
may be used to compare one tool with another.
It may be used for a preliminary assessment of
V= 7.2
exposure.
-1
min 10000
The declared vibration emission level repre-
sents the main applications of the tool. However
-1
min 20000
if the tool is used for different applications, with
different accessories or poorly maintained, the
2
cm 104
vibration emission may differ. This may signifi-
mm 1.2
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
kg 0.7
when the tool is switched off or when it is run-
Li-Ion
ning but not actually doing the job. This may sig-
Ah 1.0
nificantly reduce the exposure level over the to-
tal working period.
2
Identify additional safety measures to protect
the operator from the effects of vibration such
min 33 ±3
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
2 607 225 085
(EU)

Declaration of Conformity

2 607 225 087
(UK)
We declare under our sole responsibility that
2 607 225 147
the product described under "Technical data" is
(AUS)
in conformity with the following standards or
standardization documents: EN 60745 (battery
powered product) and EN 60335 (battery charg-
er) according to the provisions of the directives
2006/95/EC, 2004/108/EC, 98/37/EC (until
28 Dec 2009), 2006/42/EC (from 29 Dec 2009).
2
=5.5 m/s , Uncer-
h
2
.
Bosch Power Tools