IMPOSTAZIONI DI SISTEMA • SYSTEM SETUP
Calibrazione Pannello Touch.
Quando il pannello non risponde correttamente
ai comandi, per la regolazione cliccare in
sequenza al centro dei mirini.
Attenzione: Se la procedura non viene eseguita
correttamente si allunga il tempo di calibrazione.
GB Touch-Screen-Calibration.
When the touch-screen does not execute the
commands correctly, a calibration will be neces-
sary: klick the centre of the various sight-
symbols.
Attention: Calibration-time will lengthen, if pro-
cedure is not carried out correctly.
Personalizzazione Utente.
Lingua. Selezionare la lingua richiesta.
Sfondi. Scegliere lo sfondo preferito.
Reset. Ripristino impostazioni di fabbrica.
GB Customer-Personalization.
Language. Select the requested Language.
Wall-Page. Select the background preferred.
Reset. Re-establish the factory-settings.
Logo Auto.
per cambiare pagina.
Selezionare il logo e premere salva.
GB Car-Logo.
Turn to another page.
Select the requested Logo and press Save.
9
Comandi al volante.
• Premere
(Modalità) e il testo
corrispondente (SWC/Mode) sul volante. A
memorizzazione avvenuta appare un valore
numerico.
• Premere
VOL- e il tasto corrispondente sul
volante. A memorizzazione avvenuta appare un
valore numerico. Memorizzare i restanti comandi
seguendo la stessa sequenza.
Terminata la memorizzazione premere Salva/Esci.
Cancella Tutto. Reset Memoria.
SWC-1. Per modificare una impostazione.
GB Steering-Wheel Commands.
• Press (Mode) and the corresponding key (SWC/
Mode) on the steering-wheel. When memorization
is completed, a numerical value will appear.
• Press VOL- and the corresponding key on the
steering-wheel. When memorization is completed, a
numerical value will appear.
Memorize all remaining commands in the same
way.
When memorization-procedure is completed, press
Save&Exit.
Clear All. Reset Memory.
SWC-1. To modify settings.
IT/GB