Stretch-Stitch; Patch Work - Silvercrest SNMD 33 A1 Bedienungs- Und Sicherheitshinweise

Stretch-stitch

A

Patch work

Stitch
Triple straight stitch: (A)
For hardwearing seams.
The machine sews two stitches forwards
and one stitch backwards. This gives triple
reinforcement.
Stitch
Triple zig-zag: (B)
For hardwearing seams, hems and
decorative seams.
Triple zig-zag is suitable for firm fabrics like
denim, corduroy, etc.
B
Stitch
To join two pieces of fabric while leaving a
space between their edges.
1. Fold over the edges of the two pieces of
fabric for the hem and baste the edges to
a thin piece of paper leaving a small
space between them.
2. Stitch along the edge, pulling both
threads slightly when beginning to sew.
3. Use thicker than normal threads for
sewing.
4. After sewing, remove the basting and the
paper. Finish by tying knots on the
reverse side at the beginning and the
end of the seams.
Sewing basics
Stitch width Stitch length
A 2.5
Stitch width Stitch length
B 3~5
Stitch width Stitch length
F 3~5
S1, S2
S1, S2
S1
GB / IE 87