Maintenance Maintenance; Storage - Silvercrest IAN 114197 Bedienungs- Und Sicherheitshinweise

Maintenance
Maintenance
A
B
G
C

Storage

90 GB / IE
Important:
Disconnect the machine from the electricity
supply by removing the plug from the mains
socket. When cleaning the machine, it must
always be disconnected from the electricity
supply.
Removing the stitch plate (A):
Turn the handwheel (21) until the needle is fully
raised. Open the hinged front cover and remove
the stitch plate screws with the L-screwdriver (k).
Cleaning the feed dog (B):
Remove the bobbin case and use the brush (n)
supplied to clean the whole area.
Cleaning and lubricating the catch (C-G):
Remove the bobbin case. Snap the two catch
retaining arms (C) outwards. Remove the shuttle
race cover (D) and the catch (E) and clean with a
soft cloth. Lubricate at the points indicated (F) (1-
2 drops) using sewing machine oil. Turn the
handwheel until the shuttle race (G) is in the left
position. Replace the catch (E). Replace the
shuttle race cover and snap back the two catch
F
retaining arms. Insert the bobbin case and
bobbin and replace the stitch plate.
E
Important:
D
Fabric fluff and threads must be removed
regularly.
Always remove the power plug from the socket
when not using the sewing machine. Use the
dust cover (q) provided. Store the sewing
machine in a dry location which children cannot
access. If the sewing machine is not used for an
extended period, it should be protected from
excessive dust, dirt or moisture.