Sony CDX-G3000UV Bedienungsanleitung Seite 17

IPD STOP
 When repeat play is not set, playback of the
last track in album finished.
The music application in the iPod/iPhone is
terminated.
 Press PAUSE to start playback again.
NO AF (no alternative frequencies)
 There is no alternative frequency for the
current station.
 Press SEEK +/– while the program service
name is flashing. The unit starts searching
for another frequency with the same PI
(program identification) data ([PI SEEK]
appears).
NO DEV (no device)
 [USB] is selected as source without a USB
device connected. A USB device or a USB
cable has been disconnected during
playback.
 Be sure to connect a USB device and USB
cable.
NO MUSIC
 The disc or USB device does not contain a
music file.
 Insert a music CD.
 Connect a USB device with a music file in it.
NO TP (no traffic programs)
 The unit will continue searching for available
TP stations.
OVERLOAD
 USB device is overloaded.
 Disconnect the USB device, then change
the source by pressing SRC.
 The USB device has a fault, or an
unsupported device is connected.
PUSH EJT (push eject)
 The disc cannot be ejected.
 Press  (eject).
READ
 The unit is reading all track and album
information on the disc.
 Wait until reading is complete and
playback starts automatically. Depending
on the disc structure, it may take more than
a minute.
USB NO SUPRT (USB not supported)
 The connected USB device is not supported.
 For details on the compatibility of your USB
device, visit the support site.
[ ] or [
 During reverse or fast-forward, you have
reached the beginning or the end of the disc
and you cannot go any further.
[ ]
 The character cannot be displayed.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of
CD playback trouble, bring the disc that was
used at the time the problem began.
]
17
GB