Save Battery User Settings Profile; Load Battery User Settings Profile - CS Space x4 Bedienungsanleitung

15. Save Battery User Settings Profile

For your convenience the CS-Space X4 Charger has a data storage and
load program. It can store five battery data representing the respective
specifications of batteries.
Select with the Batt.Type-key „PROGRAM SELECT SAVE DATA" and confirm
it with the Enter-key.
The flashing value (1) refers to the memory place 1. Confirm it with the
Start/Enter-key of choose with the -DEC/+INC-keys another of the 5 me-
mory places.
Now the battery type is flashing. With the -DEC/+INC-keys you select
the correct one and confirm it with the enter-key.
According to the battery type you have to set now the voltage with the
-DEC/+INC-keys. Confirm it with the enter-key. IN Addition you have to
set the capacity of your battery. Use the -DEC/+INC-keys for setting and
confirm the value with the enter-key.
Now you have to confirm these settings by pressing the start/enter-key
for more than 3 seconds.
Now a star is flashing on the right side of the display. You
can select all programs (CHARGE / BALANCE / STORAGE
/ FAST / DISCHARGE) and make you settings for each
program.
Hint: For a smooth operation we recommend to set all programs
for each battery.
After all settings you press the start/enter-key for more than 3 seconds
and with the display of „SAVE ..." all settings will be saved.
Now set the sequence of charging and discharging together with the
number of cycles. Save these settings by pressing the start/enter-key
more than 3 seconds.

16. Load Battery User Settings Profile

Here you can call back the user settings you have saved before.
Select with the Batt.Type-key „PROGRAM SELECT LOAD DATA" and con-
firm it with the Enter-key.
The flashing value refers to the memory place. With the -DEC/+INC-
keys you can select the battery you need. The complete data is loa-
ded by pressing the start/enter-key for more than 3 seconds. In between
daisplay shows the information "LOAD ...".
With the -DEC/+INC-keys you can now select the program you want to
use for this battery now. You have not to do any further data inputs.
Attention: Please make sure, that the loaded program with it's para-
meters is suitable to the manufacturer's indication of the connected
battery.
the
17