Electrical Connection - Emax EH82-1 AK-GK Bedienungsanleitung

a Hob

2.3 Electrical connection

 The appliance must be connected to the mains by a qualified
professional, who is familiar with and adheres to the local
requirements and supplementary regulations of your electricity
supplier.
 All electrical work must be carried out by a qualified professional. Do
not modify the energy supply. The connection must be carried out in
accordance with the current local and legal regulations
Instructions for the installer (qualified professional)
 Remember that the connection wire should match the connection type and the
power rating of the cooker. The connection cable must be secured in a strain-
relief clamp. The ground wire must be connected to the marked clamp of the
terminal. The electric supply of the appliance must be equipped with an
emergency switch with a distance between the contacts of at least 3 mm which
disconnects the entire appliance from the mains in a case of emergency. Read
the information on the rating label and the connection diagram before
connecting the appliance to the mains.
 When the socket is not accessible for the user or a fixed electrical connection
of the appliance is required, an all-pole disconnecting device must be
incorporated during installation. Disconnecting devices are switches with a
contact opening distance of at least 3 mm. These include LS-switches, fuses and
protectors (EN 30335).
b Table
DANGER!
em@x 42
c Bracket