Kenwood KDC-BT700DAB Bedienungsanleitung Seite 23

TROUBLESHOOTING
Symptom Remedy
Elapsed playing time is not This is caused by how the tracks are recorded.
correct.
"LOADING" appears when This unit is still preparing the iPod/iPhone music list. It
you enter search mode by may take some time to load, try again later.
pressing .
• This unit can only display uppercase letters, numbers,
Correct characters are not
displayed (e.g. album
• Depending on the display language you have selected
name).
"NA FILE" Make sure the disc contains supported audio files.
( 23)
"NO DISC" Insert a playable disc into the loading slot.
"TOC ERROR" Make sure the disc is clean and inserted properly.
"PLEASE EJECT" Reset the unit. If this does not solve the problem,
consult your nearest service center.
"READ ERROR" Copy the files and folders onto the USB device again. If
this does not solve the problem, reset the USB device or
use another USB device.
"NO DEVICE" Connect a USB device, and change the source to USB
again.
"COPY PRO" A copy-protected file is played.
"NA DEVICE" Connect a supported USB device, and check the
connections.
"NO MUSIC" Connect a USB device that contains playable audio files.
• Reconnect the iPod.
"iPod ERROR"
• Reset the iPod.
and a limited number of symbols.
( 5), some characters may not be displayed
correctly.
Symptom Remedy
• Sound cannot be heard • Reconnect the Android device.
• If in [HAND MODE], launch any media player
during playback.
• Sound output only from
• If in [HAND MODE], relaunch the current media
the Android device.
• Restart the Android device.
• If this does not solve the problem, the connected
• Make sure KENWOOD MUSIC PLAY APP is installed on
Cannot playback at
[BROWSE MODE].
• Reconnect the Android device and select the
• If this does not solve the problem, the connected
• Switch off the developer options on the Android
"NO DEVICE" or "READING"
keeps flashing.
• Reconnect the Android device.
• If this does not solve the problem, the connected
Playback is intermittent or Turn off the power saving mode on the Android device.
sound skips.
• Reconnect the Android device.
"ANDROID ERROR" /
• Restart the Android device.
"NA DEVICE"
application on the Android device and start playback.
player application or use another media player
application.
Android device is unable to route the audio signal to
unit. ( 23)
the Android device. ( 9)
appropriate control mode.
Android device does not support [BROWSE MODE].
( 23)
device.
Android device does not support [BROWSE MODE].
( 23)
ENGLISH
21