Kenwood KDC-BT700DAB Bedienungsanleitung Seite 18

BLUETOOTH®
Bluetooth test mode
You can check the connectivity of the supported profile
between the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold .
"PLEASE PAIR YOUR PHONE PIN 0000" appears.
2
Search and select this unit model name (KDC-BT7
on the Bluetooth device.
3
Operate the Bluetooth device to confirm pairing.
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP)
compatibility
PB DL: Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold
16
BLUETOOTH — Audio
** DAB)
Audio player via Bluetooth
1
Press
2
Operate the Bluetooth audio player to start playback.
To
Playback / pause
Select group or folder
Reverse / Forward skip
to turn off the unit.
Reverse / Fast-forward
Repeat play
Random play
Select a file from a folder/list
Operations and display indications may differ according to their availability on the
connected device.
repeatedly to select BT AUDIO.
On the faceplate
Press
Press J / K.
Press S / T.
Press and hold S / T.
Press
ALL REPEAT, FILE REPEAT, REPEAT OFF
Press and hold
• Press
Refer to "Select a file from a folder/list" on
page 11.
.
repeatedly.
to select ALL RANDOM.
to select RANDOM OFF.