Bluetooth - Kenwood KDC-X7000DAB Bedienungsanleitung

CD / USB / iPod / ANDROID
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see
the following table), then press the knob.
3 Repeat step 2 until the desired item is
selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
USB
MUSIC DRIVE DRIVE CHANGE: The next drive ([DRIVE 1]
to [DRIVE 4]) is selected automatically and
playback starts. Repeat steps
the following drives.
SKIP SEARCH 0.5%/ 1%/ 5%/ 10%: While listening to
iPod or ANDROID, selects the skip search
ratio over the total files.
12
BLUETOOTH®
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Connect the microphone
Default: XX
Rear panel
1 3
to to select
Microphone input
jack
Pair and connect a Bluetooth device for the first time
1
Press
2
Search and select this unit model name (KDC-X7
"PAIRING" "PASS XXXXXX" Device name "PRESS" "VOLUME KNOB" scrolls on the
display.
• For some Bluetooth devices, you may need to enter the Personal Identification Number
(PIN) code immediately after searching.
3
Press the volume knob to start pairing.
"PAIRING OK" appears when pairing is completed.
Microphone
(supplied)
Secure using cord clamps (not supplied)
if necessary.
to turn on the unit.
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
Adjust the microphone
angle
*** DAB) on the Bluetooth device.