Technical Specifications - EuroLite DMX SUPERSTROBE 2700 Bedienungsanleitung

Step 1: Unscrew the fixation screws of the protective shield.
Step 2: Remove the protective shield.
Step 3: Remove the old lamp from the lamp-socket.
Step 4: Insert the new XOP-15 flash tube lamp into the lamp-socket.
Step 5: Replace the protective shield and tighten the screws.
If the fuse interrupts, please reset the breaker.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Accessory:
OMNILUX XOP-15 100V/1500W
Please note: Every information is subject to change without prior notice. 11.08.2009 ©
Do not operate this device with opened protective shield!
230 V AC, 50 Hz ~
3500 W
460 x 240 x 140 mm
5 kg
: 45° C
a
(steady state): 120° C
C
0.5 m
0.5 m
No. 85010402
23/43 00025936.DOC, Version 3.5