Installation
Replacing the interior lamp
Should the light fail to work, proceed as
follows.
1.
Switch off at the socket outlet and
pull out the mains plug.You may find it
useful to remove shelves for easy access.
2.
Use a flat tipped screwdriver to
remove the light diffuser cover.
3.
First check that the lamp hasn't
worked loose by ensuring it is screwed
securely in the holder. Replace the plug
and switch on.
4. If the lamp works, replace the light
cover by inserting the rear lug and pushing
up to locate the front two lugs.
5. If the light still fails to work, switch off
at the socket outlet and pull out the mains
plug. Replace the lamp with a new 15 watt
(max) screw cap (SES) lamp.
6. Carefully dispose of the burnt-out
lamp immediately.
7. Replacement light lamp can easily be
obtained from a good local electrical or
DIY store.
10 / 20 EN
Refrigerator /User Manual
Refrigerator /User Manual