Technical Details; Power Supply - MADRIX PLEXUS Kurzanleitung

Technical Details

Power supply:

Power consumption: 2.5 W max. (500 mA max.)
USB port:
DMX512:
DMX512 ports:
Ethernet/Art-Net:
Extension port:
SD card slot:
Display:
Handling:
Case:
Dimensions:
Weight:
Temperature range: 10 °C to 50 °C (Operating) | –10 °C to 70 °C (Storage)
Relative humidity:
Important: Pay attention to all individual warnings and instructions given in
this quick start guide!
Power Supply
MADRIX PLEXUS can be powered in two ways. You can either use the provided
®
external power supply or you can connect the device directly to a free USB 2.0
port of your computer.
WHEN CONNECTING TO USB, ALWAYS USE AN ACTIVE USB 2.0
PORT OR A USB 2.0 HUB WITH ITS OWN POWER SUPPLY.
THE DEVICE REQUIRES DC 5 V TO WORK. DO NOT USE ANY OTHER
VOLTAGE BECAUSE IT CAN DAMAGE THE DEVICE.
External, AC 100 V – 240 V ~ 50/60 Hz input,
DC 5.2 V and 1000 mA max. output over USB;
10 °C to 40 °C (Operating temperature)
–10 °C to 60 °C (Storage temperature)
20 % to 80 %, non-condensing (Relative humidity)
10 % to 80 %, non-condensing (Storage humidity)
USB 2.0, type B plug, Power over USB
2x 512 DMX channels, input or output
5-pin, XLR, female, NEUTRIK
RJ45, 10/100 MBit/s, Auto MDI-X, NEUTRIK etherCON
15-pin, D-Sub, US, female
SD (2 GB max.) and SDHC cards (32 GB max.) supported
3˝ LCD graphics display
5 control buttons
Metal enclosure, IP20
154 mm x 111 mm x 45 mm (length by width by height)
500 g
5 % to 80 %, non-condensing (Operating / Storage)
5