MADRIX PLEXUS Kurzanleitung Seite 11

Icons
An SD card is inserted into the device.
No SD card is inserted into the device.
The values in this menu are editable. You can change the settings.
Freeze is activated. The icon is blinking.
Important PLEXUS Menus
Status

Outgoing and Incoming Data
Playback
Language
IP Address
Navigate to the menu 'Information'
à 'Status'. The name of the device,
its IP address, the time and date, its
status, and the statuses of the bottom
connections are displayed.
| Connected
 Outgoing Data
Navigate to the menu 'Stand-Alone' à
'Playback'. Details of the current Scene
are displayed. And you may control
playback. Learn more in the chapter
'Control Buttons' in this guide on
page 17.
Navigate to the menu 'Settings' à
'Device'. Change the language when
needed as described under 'How To Edit
Values' on page 8.
Navigate to the menu 'Network' à
'IP Address'. If necessary, change the
settings for IP address, subnet mask,
and default gateway as described under
'How To Edit Values' on page 8.
X
Not Connected
 Incoming Data
9