MADRIX PLEXUS Kurzanleitung Seite 18

Extension Port – Remote Control
9 10 11 12 13 14 15
1
1 2 3
devices for remote control. In MADRIX
'PLEXUS Configuration...' à tab 'Extension Ports' to configure each port
individually for the corresponding PLEXUS Configuration.
Pin Assignment
1
2 Port 1
3 Port 3
4 Port 5
5 Port 7
6 Port 9
7
8
9
10 Port 2
11 Port 4
12 Port 6
13 Port 8
14 Port 10
15
Web Server – Remote Control
MADRIX PLEXUS provides an integrated web server. Connect your PLEXUS and
®
the remote device accessing the PLEXUS to a network. Open a web browser and
type in the IP address of your PLEXUS. The IP address can be found and changed
in the PLEXUS menu 'Network' à 'IP Address'. Once loaded, the page will show
an interactive illustration of your device for remote control.
Please note: Make sure to use one and the same network and check if the
settings of the operating system and the settings of the PLEXUS are correct.
16
4 5 6 7 8
Extension
Ground
Power
Ground
Power
Ground
MADRIX
®
15-pin,
individually addressable ports. The
extension port makes it possible to
connect external analog or digital
, please open the menu 'Tools' à
®
Available Settings
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output
Digital Input, Digital Output
5 V, 100 mA max. (shared with Pin 9)
5 V, 100 mA max. (shared with Pin 7)
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output, Analog Input
Digital Input, Digital Output
Digital Input, Digital Output
PLEXUS features
serial connector
a
with